Atlas Copco 2204198310(1624966600) 400 V 50 Hz Axial Fan

Atlas Copco 2204198310(1624966600) 400 V 50 Hz Axial Fan là phụ tùng chính hãng Atlas Copco do Á Đông Group phân phối tại Việt Nam. Sản phẩm cam kết 100% chính hãng, phù hợp thay thế theo đúng mã, giao hàng nhanh và hỗ trợ kỹ thuật tra cứu mã phụ tùng.

Thông số & thông tin sản phẩm

Danh mục mã phụ tùng (model)

Thông tin chi tiết

The 2204198310 is a SANMU axial cooling fan. It carries the Atlas Copco part number and the model YWF(K)4D500-ZX06C. The fan is built for the air-cooling circuit of oil-injected screw compressors . There it pulls plant air across the cooler pack. That keeps the discharge and aftercooler temperatures inside the design envelope.

This 2204198310 axial fan replaces part number 1624966600, an earlier 400 V 50 Hz D500 fan. It keeps the same electrical rating and a compatible mounting interface. The replacement restores cooling without changing the supply or the fan frame. The unit delivers a rated 735 W input at 1390 r/min. It moves up to 5650 m³/h against 160 Pa of static pressure.

Item

Description

Part name

Axial fan 400 V 50 Hz

Part number

2204198310

Supersession

1624966600

Atlas Copco Axial Fan 2204198310-1624966600 (1)

Technical Specifications

The table below lists the nameplate data of the 2204198310 as published for the fan. These values describe the unit you receive, not a loosely matched substitute.

Item

Specification

Product type

Axial fan (AXIAL FAN)

Manufacturer

SANMU

Model

YWF(K)4D500-ZX06C

Motor type

4-pole three-phase AC (4D)

Rated voltage

400 V

Frequency

50 Hz

Rated current

1.54 A

Input power

735 W

Rated speed

1390 r/min

Max airflow @ static pressure

5650 m³/h @ Pst 160 Pa

Max efficiency

34.1% (ErP2015 compliant, N = 41.3)

Insulation class

Class F (CL.F)

Protection rating

IP54

Atlas Copco Axial Fan 2204198310-1624966600 (2)

Working Principle

An axial fan draws air parallel to the shaft and pushes it straight through the cooler. The 2204198310 spins its blade wheel at 1390 r/min. A 4-pole three-phase motor drives it on the 400 V 50 Hz supply. Air enters one face of the cooler pack. It absorbs heat from the oil and air cores. It leaves warmer on the far side.

The blades move a broad column of air at low pressure. That suits a cooler needing even coverage across a wide face. The 5650 m³/h flow at 160 Pa static pressure carries away the heat of compression. The motor stays within its Class F insulation limit while this happens. Steady airflow keeps the discharge temperature from drifting upward during long running cycles.

Atlas Copco Axial Fan 2204198310-1624966600 (3)

Motor and Electrical Characteristics

The 2204198310 uses a 4-pole three-phase AC motor, marked 4D on the nameplate. On a 50 Hz supply a 4-pole motor turns close to 1500 r/min, and the rated 1390 r/min reflects the load and slip of the fan wheel. The 400 V three-phase input draws 1.54 A at the rated point and consumes 735 W.

Class F insulation lets the motor windings tolerate higher temperatures than Class B, which adds margin in a warm compressor enclosure. The IP54 enclosure keeps dust and spray away from the windings and bearings. Together these ratings suit continuous duty behind the cooler, where the ambient can climb during summer running.

Atlas Copco Axial Fan 2204198310-1624966600 (4)

Industrial Applications

The 2204198310 serves oil-injected rotary screw compressors that use an air-cooled aftercooler and oil cooler. It is common on GA-class and similar packaged units. There the cooling fan sits in the rear enclosure and feeds the cooler stack.

Beyond compressors,

Catalog PDF

📄 Tải catalog phụ tùng (PDF)

Á Đông Group – Nhà phân phối phụ tùng máy nén khí Atlas Copco chính hãng tại Việt Nam. Tư vấn kỹ thuật, tra cứu mã phụ tùng, giao hàng nhanh & bảo hành toàn quốc. Website: sullivan-palatek.vn