Atlas Copco 2906033000 Rotor Exchange Kit: Operational Restoral for Dryer Sealing Systems là phụ tùng chính hãng Atlas Copco do Á Đông Group phân phối tại Việt Nam. Sản phẩm cam kết 100% chính hãng (Original Genuine), phù hợp thay thế theo đúng mã, giao hàng nhanh và hỗ trợ kỹ thuật tra cứu mã phụ tùng.
Atlas Copco 2906033000 Rotor Exchange Kit: Operational Restoral for Dryer Sealing Systems là phụ tùng chính hãng Atlas Copco do Á Đông Group phân phối tại Việt Nam. Sản phẩm cam kết 100% chính hãng (Original Genuine), phù hợp thay thế theo đúng mã, giao hàng nhanh và hỗ trợ kỹ thuật tra cứu mã phụ tùng.
| Thương hiệu | Atlas Copco |
| Mã phụ tùng (SKU) | 10907 |
| Delivery Time | 3-5 Days |
| MOQ | 1 Pcs |
| Package | Original Package |
| Packaging Details | Carton |
| Place of Origin | BE |
| Product Quality | 100% Original Genuine, 100% Original Parts |
| Mã phụ tùng | Loại |
|---|---|
| 2906033000 | Phụ tùng Atlas Copco chính hãng |
Optimal Sealing and Purge Air Protection in Air Dryer Systems
Rotary desiccant air dryers, such as the Atlas Copco MD series , depend on precise sealing around the rotating drum to separate wet inlet air streams from dry discharge air. The Atlas Copco Rotor Exchange Kit (2906033000) supplies factory-spec sealing components designed to maintain strict compartment isolation within the dryer housing. By replacing worn perimeter seals, lip rings, and housing gaskets, this kit eliminates internal bypass leakage and maintains continuous pressure dew point performance across demanding industrial environments.
Atlas Copco Rotor Exchange Kit 2906033000 (1)
Operational Risks of Delayed Rotor Seal Replacement
Continuous exposure to elevated temperatures, pressure fluctuations, and residual oil vapor gradually degrades elastomer gaskets and sealing lips. Operating an air dryer with worn rotor seals introduces several serious operational hazards:
Pressure Dew Point Spike: Degraded rotor seals permit moist inlet air to bypass the desiccant matrix, elevating moisture levels in downstream piping and harming pneumatic tooling.
Excessive Purge Air Loss: Damaged O-rings and perimeter gaskets create air leaks, increasing air compressor load and wasting electrical energy.
Rotor Housing Friction and Wear: Hardened or torn seal lips increase mechanical drag on the rotor shaft, accelerating wear on bushings and drive mechanisms.
Sight Glass Clouding or Failure: Aged sight glass assemblies obscure oil and desiccant inspection pathways, risking delayed maintenance detection.
Atlas Copco Rotor Exchange Kit 2906033000 (2)
Engineered Precision and Material Integrity
Every component in the 2906033000 exchange kit utilizes heat-resistant fluorocarbon and synthetic elastomers tailored specifically for compressed air drying applications. The included MD600-1000 seal rings maintain consistent radial contact without excessive drag force, preserving motor energy while sealing high-pressure differential zones. Precision-molded O-rings and Type 1 gaskets provide immediate compression recovery, guaranteeing zero air bypass under continuous thermal cycling.
Atlas Copco Rotor Exchange Kit 2906033000 (3)
Technical Specifications and Kit Breakdown
The Atlas Copco 2906033000 service kit provides all critical wear parts needed for a comprehensive rotor overhaul in one matched package.
Physical Property
Metric Value
Total Kit Weight
1.1 kg
Package Length
260 mm
Package Width
120 mm
Package Height
260 mm
BOM Details (Bill of Materials)
Component Description
Specification
Quantity
O-Ring
80 x 3 mm
Seal Ring
MD600-1000
Sealing Ring
MD600/1000
Gasket Type 1
80 x 128 x 2 mm
Gasket Type 1
61 x 107 x 2 mm
Pin Parallel
Standard Fit
Bushing
Precision Machined
Sight Glass
MD50/1800 BD & CD
Seal Lip
High-Flex Elastomer
O-Ring
114.5 x 3 mm
O-Ring
829 x 6 mm
Atlas Copco Rotor Exchange Kit 2906033000 (4)
Installation Best Practices and Maintenance Guidelines
To ensure peak performance during rotor seal overhaul, maintenance technicians should follow these essential steps:
Depressurize and Isolate: Fully isolate the dryer unit from the compressed air network and verify complete depressurization prior to opening housing covers.
Clean Sealing Surfaces: Thoroughly remove old gasket residue, dust, and lubricant buildup from rotor housing contact faces. Avoid using abrasive tools that scratch metal mating surfaces.
Lubricate Elastomers Correctly: Apply a light film of approved synthetic grease to O-ri
Á Đông Group – Nhà phân phối phụ tùng máy nén khí Atlas Copco chính hãng tại Việt Nam. Tư vấn kỹ thuật, hỗ trợ tra cứu mã phụ tùng, giao hàng nhanh & bảo hành toàn quốc. Website: sullivan-palatek.vn
