Atlas Copco 1616714601 1616714700 C146 Air End Head Shell End Covers là phụ tùng chính hãng Atlas Copco do Á Đông Group phân phối tại Việt Nam. Sản phẩm cam kết 100% chính hãng (Original Genuine), phù hợp thay thế theo đúng mã, giao hàng nhanh và hỗ trợ kỹ thuật tra cứu mã phụ tùng.
Atlas Copco 1616714601 1616714700 C146 Air End Head Shell End Covers là phụ tùng chính hãng Atlas Copco do Á Đông Group phân phối tại Việt Nam. Sản phẩm cam kết 100% chính hãng (Original Genuine), phù hợp thay thế theo đúng mã, giao hàng nhanh và hỗ trợ kỹ thuật tra cứu mã phụ tùng.
| Thương hiệu | Atlas Copco |
| Mã phụ tùng (SKU) | 10899 |
| Delivery Time | 3-5 Days |
| MOQ | 1 Pcs |
| Package | Original Package |
| Packaging Details | Wooden Box |
| Place of Origin | BE |
| Product Quality | 100% Original Genuine, 100% Original Parts |
| Mã phụ tùng | Loại |
|---|---|
| 1616714601 | Phụ tùng Atlas Copco chính hãng |
| 1616714700 | Phụ tùng Atlas Copco chính hãng |
The Atlas Copco 1616714601 and 1616714700 are the matched inlet and exhaust end covers. They seal the two ends of the C146 oil-injected rotary screw air-end head shell. Together they form the pressure boundary at both sides of the rotor group. They hold the bearing supports and sealing faces in position. They keep lubricating oil and compressed air inside the airend. When a cover cracks, distorts, or loses its seal, the air end leaks. It runs hot and loses efficiency until the cover is replaced.
Technical Specifications
These two numbers are supplied as a pair because the C146 head shell needs both ends closed. The confirmed identity and application facts are listed below. Dimensional and material values are not held in one accessible official data sheet, so the pre-order checklist handles them instead of guessing.
Attribute
Detail
Part numbers
1616714601, 1616714700
Product type
Air-end head-shell end cover (inlet and exhaust)
Application
Atlas Copco C146 oil-injected rotary screw air end
Manufacturer
Atlas Copco
Supplied as
Matched pair (one inlet-side, one exhaust-side cover)
Atlas Copco Air End Head Shell End Covers 1616714601 1616714700 (1)
C146 Air End Application
The C146 is an oil-injected rotary screw air end. It serves the Atlas Copco GA-class industrial compressor range. Its service life is backed by dedicated maintenance kits. These include the C146 motor overhaul kit and the C146 8000-hour service kit. That confirms the airend as a long-running, serviced component. It is not a discard-at-failure unit. The 1616714601 and 1616714700 covers belong to the structural envelope of this air end. They matter whenever a C146 airend is opened for overhaul. They also matter during bearing replacement or rotor service. A worn 1616714601 cover forces an early airend opening.
A single air-end model can appear in several frames and build years. The exact machine that carries a given C146 airend needs the compressor serial number. Atlas Copco asks for the serial number to verify compatibility. The same rule applies here. Part numbers identify the cover. The serial number identifies the installation.
Atlas Copco Air End Head Shell End Covers 1616714601 1616714700 (2)
What the Inlet and Exhaust End Covers Do
A screw air end compresses air between two intermeshing rotors. They turn inside a precision housing. The head shell is the central casting that holds the rotor bores. Its two ends are closed by the end covers. One cover faces the inlet side where filtered air enters. The other faces the exhaust side where the compressed mixture leaves. That mixture is oil-laden and heads to separation and cooling.
Each cover does three jobs at once. First, it seals the pressure boundary so oil and air stay inside. Second, it locates the bearing housings and carries the load path. On the drive side it transfers rotor load into the frame. Third, it provides the machined faces and bolt circle for concentric seating. A cover that is not flat and true shifts the rotor alignment. The air end then wears prematurely.
The covers also protect the internal geometry. Screw rotors run with very tight clearances. Any distortion of the end structure reaches those clearances directly. A rigid, correctly torqued cover keeps the rotors centered. A warped or badly bolted cover lets them scrape. This is why end covers are precision parts. They are not simple flat plates. The 1616714601 inlet cover and 1616714700 exhaust cover must both stay true to protect the rotors.
Atlas
Á Đông Group – Nhà phân phối phụ tùng máy nén khí Atlas Copco chính hãng tại Việt Nam. Tư vấn kỹ thuật, hỗ trợ tra cứu mã phụ tùng, giao hàng nhanh & bảo hành toàn quốc. Website: sullivan-palatek.vn
