Atlas Copco 2906079600 HP Element Exchange Kit

Atlas Copco 2906079600 HP Element Exchange Kit là phụ tùng chính hãng Atlas Copco do Á Đông Group phân phối tại Việt Nam. Sản phẩm cam kết 100% chính hãng, phù hợp thay thế theo đúng mã, giao hàng nhanh và hỗ trợ kỹ thuật tra cứu mã phụ tùng.

Thông số & thông tin sản phẩm

Danh mục mã phụ tùng (model)

Thông tin chi tiết

Á Đông Group Air Compressor Co., Ltd., a trusted distributor of Atlas Copco products, supplies the genuine 2906079600 HP Element Exchange Kit. This kit is specifically designed for the ZR250-315VSD series of oil-free rotary screw compressors.

Atlas Copco 2906079600 HP Element Exchange Kit

Product Introduction

As a critical maintenance solution, Atlas Copco 2906079600 HP Element Exchange Kit provides all necessary sealing components to restore the compression efficiency of your high-pressure (HP) element. We source this kit directly from Atlas Copco (Shanghai) Trading Co., Ltd., guaranteeing 100% authenticity and original factory quality. Users can achieve a 99.9% sealing success rate with proper installation using this genuine kit.

Atlas Copco 2906079600 HP Element Exchange Kit (1)

Product Specifications

Parameter

Value/Information

Part Name

ZR 250-315VSD HP ELMT EXCH KIT

Part Number

2906079600

Origin

Belgium (BE)

Tariff Code

73182200

Dimensions (L x W x H)

290 mm x 190 mm x 40 mm

Weight

331 gr

Applicable Model

Atlas Copco ZR250-315VSD Oil-Free Compressors

Atlas Copco 2906079600 HP Element Exchange Kit (2)

Key Advantages

Genuine Original Standards: This kit consists of 100% genuine Atlas Copco components. We purchase it directly from Atlas Copco (Shanghai) Trading Co., Ltd., ensuring a perfect fit and original material quality.

Comprehensive Sealing Solution: The kit includes all necessary O-rings, plug seals, and washers for a complete HP element overhaul. It addresses 100% of potential leak points in the high-pressure stage.

Optimized for Oil-Free Operations: Specifically engineered for oil-free compressors, these seals maintain the integrity of the air path without contamination risks.

Atlas Copco 2906079600 HP Element Exchange Kit (3)

Installation Notes & Step-by-Step Guide

Strict adherence to the following protocols ensures a 98% reduction in post-maintenance leak risks.

Safety First (Pre-installation):

Lockout/Tagout (LOTO): Isolate the compressor from the main power supply.

Depressurize: Close the inlet/outlet valves and release all internal pressure (ensure pressure gauges read zero).

Cool Down: Allow the compressor to cool for at least 30 minutes to prevent burns.

Step-by-Step Replacement:

Step 1 Disassembly: Carefully disassemble the HP element housing. Note the orientation of old seals before removal.

Step 2 Cleaning: Clean the seal grooves and mating surfaces with a lint-free cloth. The surface finish must be smooth (Ra ≤ 4μm). Do not scratch the sealing surfaces.

Step 3 Lubrication: Apply a thin layer of clean compressor oil or assembly lubricant to the new O-rings before installation. This prevents pinching or rolling during assembly.

Step 4 Installation: Fit the new O-rings (39.2X3, 50X3.5, and 99.1 X 5.7) into their precise grooves. Ensure no twisting occurs.

Step 5 Torque Tightening: Tighten the housing bolts using a calibrated torque wrench. Follow the manufacturer’s cross-tightening sequence. Under-torquing causes leaks; over-torquing damages seals.

Atlas Copco 2906079600 HP Element Exchange Kit (4)

FAQs

Q1: How do I verify this is a genuine part?

A: Every kit sourced by Á Đông Group Air Compressor Co., Ltd. comes directly

Catalog PDF

📄 Tải catalog phụ tùng (PDF)

Á Đông Group – Nhà phân phối phụ tùng máy nén khí Atlas Copco chính hãng tại Việt Nam. Tư vấn kỹ thuật, tra cứu mã phụ tùng, giao hàng nhanh & bảo hành toàn quốc. Website: sullivan-palatek.vn