
Reducer Of Long Retractable Soot Blower là hộp giảm tốc của Zhejiang Lemond, dùng để phụ tùng truyền động cho máy thổi bụi. Thiết bị chính hãng, thông số kỹ thuật chi tiết theo bảng dưới đây (giá trị giữ nguyên theo nhà sản xuất).
Thân máy, cơ cấu căng xích, hộp nhồi, tuyến hộp nhồi, ống lót bằng đồng
Hộp giảm tốc còn được gọi là hộp số và bộ vận chuyển, đó là cơ chế truyền động của hệ thống quạt muội và chúng. là bộ phận chính của máy quạt muội, máy quạt muội khác nhau phù hợp với bộ giảm tốc khác nhau, bộ giảm tốc ở trên dành cho máy quạt muội có thể thu vào dài của chúng tôi, loại PSSL.
Chúng tôi sản xuất tất cả các loại hộp giảm tốc cho Shanghai Clyde Bergemann trong 20 năm nữa, cho máy thổi muội loại V04, V92. D92, PSSL, PSSL/B, PSSB, PSSB/B, PSAT, PSAL, PSAT/D, RKSB, RKAT, RKSL, RLSB. Chúng tôi chỉ có thể cung cấp công cụ giảm giá tương tự cho bạn nếu bạn cung cấp tên dự án.
2) để dẫn hướng và điều chỉnh hộp nạp để đạt được độ kín giữa ống ngoài và ống trong.
Bộ truyền động công tắc giới hạn và đòn bẩy van mở cũng được gắn trên thân hộp của đường truyền và được sử dụng làm cơ cấu van mở cùng với chốt va chạm.
hơn 30.000 mét vuông, diện tích xây dựng chiếm thêm 25.000 mét vuông. Chúng tôi đã chi 30 triệu RMB để đăng ký vốn, bây giờ chúng tôi sở hữu 110 nhân viên, trong đó có thêm 40 nhân viên kỹ thuật và 6 kỹ sư cao cấp. Chúng tôi sở hữu tất cả các loại thiết bị gia công cơ khí, đội ngũ kỹ thuật vững chắc, công cụ kiểm tra hoàn chỉnh, đây là những lợi thế chính của chúng tôi.
Chúng tôi đang tham gia sản xuất, phát triển và bán nồi hơi đốt than, khử LƯU huỳnh GGH, khử nitơ SCR, làm mát khí, bộ sấy sơ bộ không khí,bên cạnh đó, chúng tôi có quạt muội hơi, quạt muội、 âm thanh và quạt muội sóng xung kích được sử dụng trên góc ngọn lửa ống khói ngang. Hơn nữa, hệ thống điều khiển và đường ống liên quan, hệ thống vận chuyển khí nén và thiết bị môi trường được cung cấp từ phía chúng tôi.
Để đạt được tiêu chuẩn kỹ thuật và đáp ứng yêu cầu đặc biệt của khách hàng, chúng tôi thực hiện xử lý đặc biệt cho một số phụ tùng chính. Chúng tôi áp dụng cách điện loại F cho động cơ điện (Nhiệt độ động cơ tăng cao tới 105 ℃) và mức bảo vệ IP55(loại chống nước và chống bụi)
, mức độ bảo vệ của công tắc vị trí đạt đòn bẩy cao như IP67(loại an toàn chống ngập và chống bụi), hơn nữa, thép đặc biệt nước ngoài và thép Bảo được sử dụng cho ống giáo để đáp ứng nhu cầu nhiệt độ cao của khí thải và ăn mòn.
| Sootblower type | PSSLGB |
|---|---|
| Name | sootblower gear box |
| Gear Material | 42CrMo |
| Worm gear material | ZCuPu10-1 |
| Worm material | Z0CrMuTi |
| Mount position | upright |
| Processing Customization | Yes |
| Layout form | Cross-shaped |
| Lĩnh vực ứng dụng | Boiler system |
| Input speed | 1400 rpm |
| Output speed | 7.6 rpm/ 24 rpm |
| Output Torque | 210 NM/ 90 NM |
| Kiểu/Loại | Worm gear reducer |
| Certificate | ISO9001: 2015 |
| Rated power | 0.25-1.5kw |
| Ứng dụng | Reduction box |
Body, chain tension mechanism, stuffing box, stuffing box gland, brass bush
Reducer also called gearbox and Carriage, it’s the drive mechanism of Soot Blower system and they. are the key parts of sootblower, different sootblower match the different reducer, the reducer above is for our long retractable sootblower, PSSL type.
We produce all type of reducer for Shanghai Clyde Bergemann for 20 more years, for sootblower type V04, V92. D92, PSSL, PSSL/B, PSSB, PSSB/B, PSAT, PSAL, PSAT/D, RKSB, RKAT, RKSL, RLSB. We could provide the same reducer for you only if you provide the project name.
The ash blower reducer usually consists of a gearbox, carriage and motor. The walking roller is fixed on the walking box. The double-shaft gear box is driven by a three-phase motor, the drive gear on one end of the shaft is engaged with the rack on the girder to achieve the axial movement of the walking box. Another shaft(longitudinal) allows the ash pipe to rotate through chain drive. The ash tube packing box has two functions:
2) to guide and accommodate the filling box to achieve the sealing between the outer tube and the inner tube.
The limited-switch actuator and the open-valve lever are also mounted on the box body of the gear line and used as the open-valve mechanism together with the crash pin.
more than 30,000 square meters, construction area occupied for 25,000 square meters more. We spent 30 million RMB for capital registration, now we own 110 staffs, among which 40 more technical staffs and 6 senior engineers. We own all kind of mechanical processing equipment, solid technical team, complete testing tools, these are our key advantages.
We are engaged in manufacturing, developing and selling coal-fired boiler, GGH desulfurization, SCR denitration, gas cooler, air preheater ,besides, we have steam soot blower、 acoustic soot blower and shock wave soot blower which used on Horizontal flue flame angle. Moreover, the relevant control and piping system, aspirating pneumatic conveying system and environmental equipment are offered from our side.
Products are widely used in 100mw~1200mw power plant boiler, chemical boiler、paper-making、glass、cement kiln boiler, waste incineration, industry boiler and marine boiler, which provide professional technical solution and complete pre-sale、after –sale services for our customers.
We produce and manufacture strictly according to industrial technical standard and management standard, in order to provide premium and reliable products for our customers. Now we own five multiple invention patent certificates(patent NO.: ZL 2014 1 0220354.7 and so on) and more than a dozen patents for utility models
(patent NO.: ZL 2014 2 0269779.2 and so on). we also obtained construction mechanical and electrical installation engineering professional contractor qualification certificate and construction safety production license.
In order to reach technical standard and fulfill customer’s special requirement, we make exceptional processing for some key spare parts. We adopt F class insulation for electric motor(Motor temperature rise as high as 105 ℃) and protection levels of IP55(anti-water spray and dustproof type)
,protection level of position switch reach high lever as IP67(flooding safety and dustproof type), moreover, foreign special steel and Bao steel is adopted to the lance tube in order to meet the demand of high temperature of gas flue and corrosion.
Based on the enterprise tenet of quality coming first, high- integrity business and win-win cooperation, the enterprise devote itself for providing high quality products and superior services for our domestic and foreign customers all the time.
Till now, our products have been exported to many foreign countries like Malaysia, Indonesia, Vietnam and Pakistan.
We will continuously provide our customers a variety of products, technical reconstruction and good maintain services with superb professional skills and cooperative spirit.
| Sootblower type | PSSLGB |
|---|---|
| Name | sootblower gear box |
| Gear Material | 42CrMo |
| Worm gear material | ZCuPu10-1 |
| Worm material | Z0CrMuTi |
| Mount position | upright |
| Processing Customization | Yes |
| Layout form | Cross-shaped |
| Application field | Boiler system |
| Input speed | 1400 rpm |
| Output speed | 7.6 rpm/ 24 rpm |
| Output Torque | 210 NM/ 90 NM |
| Type | Worm gear reducer |
| Certificate | ISO9001: 2015 |
| Rated power | 0.25-1.5kw |
| Application | Reduction box |
Á Đông Group cung cấp thiết bị thổi bụi lò hơi Zhejiang Lemond chính hãng tại Việt Nam. Liên hệ để được tư vấn, báo giá và hỗ trợ kỹ thuật.















