Máy thổi bụi bộ sấy không khí (air preheater soot blower) làm sạch tro phần khí của bộ sấy không khí, giảm trở lực khí thải, ngăn quạt chết máy.
HXYR-5 HXYR-5 200 64 300 95 HXYR-5 type soot blower is a soot blower that uses steam or air as the blowing medium and is specifically used to blow ash from the heating area of a rotary air preheater. The soot blowing gun barrel, nozzle diameter on the gun barrel, and arrangement spacing of the HXYR-5 soot blower are specially designed according to different air preheaters and installation requirements. During operation, the soot blowing gun barrel only performs telescopic motion, while the rotary air preheater performs rotational motion. Therefore, the soot blowing trajectory of each nozzle is a few turns of Archimedean spiral, and several nozzles work together to complete the blowing of the entire air preheater. The airflow emitted by the nozzle has a certain diffusion angle, and the width of the spray coverage varies with the distance from the nozzle to the fan plate of the air preheater. Usually, when the distance between the nozzle and the fan-shaped plate is 200 millimeters, the coverage surface width is about 64 millimeters, while when the distance is 300 millimeters, the coverage surface can reach 95 millimeters. Thông số kỹ thuật chính: Hành trình: according to contract requirements Movement speed of soot blowing pipe: according to contract requirements Môi chất thổi bụi: hơi nước hoặc khí nén ～1.5MPa Áp suất thổi bụi:~1.5MPa ～2M Effective blowing radius:~2M Number and diameter of nozzles: determined according to contract requirements ASR-6324 B5 0.18KW 1370rpm.380V.50Hz.3P Electric motor (for domestic use in China): ASR-6324 B5 type 0.18KW 1370rpm.380V.50Hz.3P 360kg+ 116kg Khối lượng gần đúng: 360kg+116kg per meter of travel Main components 1. ( ) 1. Sports car and electric motor (reducer) 2. 2. Soot blower valve (lift valve) and counter flange 3. 3. Beam body 4. ( ) 4. Wall box (interface with boiler) 5. 5. Power cable 6. 6. Furnace soot blowing pipe 7. 7. Front bracket (supporting the soot blower) 8. 8. Inner tube 9. 9. Furnace support frame 10. 10. Electrical box and travel control (front and rear limit switches)
HXYR-5型吹灰器是以蒸汽或空气作为吹灰介质，专门用于吹扫回转式空气预热器受热面积灰的吹灰器。HXYR-5型吹灰器的吹灰枪管、枪管上的喷嘴口径及布置间距根据不同的空预器和安装要求专门设计。运行时，吹灰枪管只作伸缩运动，而回转式空预器作旋转运动，因此，每个喷嘴的吹灰轨迹是数圈阿基米德螺旋线，几个喷嘴一起，完成对整个空气预热器的吹扫。喷嘴喷出的气流有一定扩散角，喷射覆盖面宽度随喷嘴到空预器扇形板的距离不同而变化。通常，喷嘴距扇形板的距离为200毫米时，覆盖面宽约64毫米，而当距离为300毫米时，覆盖面可达95毫米。 HXYR-5 type soot blower is a soot blower that uses steam or air as the blowing medium and is specifically used to blow ash from the heating area of a rotary air preheater. The soot blowing gun barrel, nozzle diameter on the gun barrel, and arrangement spacing of the HXYR-5 soot blower are specially designed according to different air preheaters and installation requirements. During operation, the soot blowing gun barrel only performs telescopic motion, while the rotary air preheater performs rotational motion. Therefore, the soot blowing trajectory of each nozzle is a few turns of Archimedean spiral, and several nozzles work together to complete the blowing of the entire air preheater. The airflow emitted by the nozzle has a certain diffusion angle, and the width of the spray coverage varies with the distance from the nozzle to the fan plate of the air preheater. Usually, when the distance between the nozzle and the fan-shaped plate is 200 millimeters, the coverage surface width is about 64 millimeters, while when the distance is 300 millimeters, the coverage surface can reach 95 millimeters.
主要技术参数： Main technical parameters: 吹灰器行程：根据合同要求 Soot blower stroke: according to contract requirements 吹灰管移动速度：根据合同要求 Movement speed of soot blowing pipe: according to contract requirements 吹灰介质：蒸汽或压缩空气 Soot blowing medium: steam or compressed air 吹灰压力：～1.5MPa Soot blowing pressure:~1.5MPa 有效吹灰半径：～2M Effective blowing radius:~2M 喷嘴数量及口径：根据合同要求决定 Number and diameter of nozzles: determined according to contract requirements 电动机（中国国内使用）：ASR-6324 B5型0.18KW 1370rpm.380V.50Hz.3P Electric motor (for domestic use in China): ASR-6324 B5 type 0.18KW 1370rpm.380V.50Hz.3P 近似重量：360kg+每米行程116kg Approximate weight: 360kg+116kg per meter of travel
主要零部件 Main components 1.跑车与电动机(减速机) 1. Sports car and electric motor (reducer) 2.吹灰器阀门（提升阀）及反法兰 2. Soot blower valve (lift valve) and counter flange 3.梁体 3. Beam body 4.墙箱(与锅炉接口) 4. Wall box (interface with boiler) 5.动力电缆 5. Power cable 6.炉内吹灰管 6. Furnace soot blowing pipe 7.前托架（支撑吹灰枪） 7. Front bracket (supporting the soot blower) 8.内管 8. Inner tube 9.炉内支撑架 9. Furnace support frame 10.电气箱与行程控制（前、后限位开关） 10. Electrical box and travel control (front and rear limit switches)
Á Đông Group cung cấp thiết bị thổi bụi lò hơi Hubei Huaxin chính hãng tại Việt Nam — tư vấn, báo giá và hỗ trợ kỹ thuật.
