
Acoustic Soot Blower là máy thổi bụi âm thanh (Sonic) của Zhejiang Lemond, dùng để làm sạch tro tơi bằng sóng âm, không tiếp xúc cơ khí. Thiết bị chính hãng, thông số kỹ thuật chi tiết theo bảng dưới đây (giá trị giữ nguyên theo nhà sản xuất).
| Kiểu/Loại | Acoustic soot blower |
|---|---|
| Classification | diaphragm type |
| Môi chất thổi bụi | Compressed air |
| Lĩnh vực ứng dụng | ESP , SCR, back flue gas pass of the boiler |
| Diaphragm material | titanium alloy |
| Generator material | Stainless steel |
| Horn material | Stainless steel |
| Gas source pressure | 0.7MPa |
| Tần số | 75-250Hz |
| Range of action(front) | 12-16m |
| Range of action(sides) | 4-6m |
| Power Supply Voltage | 220VAC/110VAC/24VDC |
| Total weight | 60kg |
Máy thổi bụi âm thanh (Acoustic) làm sạch tro bằng sóng âm tần thấp năng lượng cao, không có bộ phận chuyển động và không tiếp xúc cơ khí với bề mặt trao đổi nhiệt. Phù hợp cho tro tơi và thiết bị nhạy cảm như lọc bụi, xúc tác SCR; cấu tạo đơn giản, bảo trì thấp, dùng nguồn khí nén.
1. Acoustic sootblower cleaning is based on the principle of kinetic activation of dust particles using sound waves at frequencies that are normally between 125 & 400 Hz. The sound waves are generated by a special bell shaped horn powered by air and controlled electrically by a solenoid valve. The kinetic energy imparted to the dust particles cause them to vibrate, break their bonds with other particles and the surface to which they cling. These “Fluidized” particles are then dispersed by gravity or gas stream pressure. 2.Dust build – ups occur when smaller dust particles join together i.e. greater & large mass sound energy generated by the Sonic Power System breaks the bond of these particles which allows them to fluidize and allow them to be maintained at a carrying velocity in duct work or to fall by gravity from bags and precipitator plates. The sound waves can also be used to fluidize dust to facilitate removal from hoppers bins etc. Wherever there is problem with dust plugging, dust build up or dust flow. The system may provide the answer to the problem. 3.The method of Sonic Cleaning of acoustic sootblower is in fact more useful to “Keep Clean” than to clean a dust coated surface. If the layer has already been allowed to grow too much the physical properties of the deposit can be too severe, the outer surface hardened or sintered and may cause strong adhesion to the tube. But if we permit the cleaning.
| Type | Acoustic soot blower |
|---|---|
| Classification | diaphragm type |
| Soot blowing medium | Compressed air |
| Application field | ESP , SCR, back flue gas pass of the boiler |
| Diaphragm material | titanium alloy |
| Generator material | Stainless steel |
| Horn material | Stainless steel |
| Gas source pressure | 0.7MPa |
| Frequency | 75-250Hz |
| Range of action(front) | 12-16m |
| Range of action(sides) | 4-6m |
| Power Supply Voltage | 220VAC/110VAC/24VDC |
| Total weight | 60kg |
Á Đông Group cung cấp thiết bị thổi bụi lò hơi Zhejiang Lemond chính hãng tại Việt Nam. Liên hệ để được tư vấn, báo giá và hỗ trợ kỹ thuật.















